Cirrus-logic CS4207 User Manual download pdf (Page 91)

DS880F4 91

CS4207

6.9.11 Configuration Default

The Configuration Default register is used by software as an aid in determining the configuration of jacks

and devices attached to the codec. At the time the codec is first powered on, this register is internally load-

ed with default values indicating the typical system use of this particular pin/jack. After this initial loading,

it is completely codec opaque, and its state, including any software writes into the register, must be pre-

served across reset events such as Link Reset or Codec Reset (the Function Reset Verb). Its state need

not be preserved across power level changes.

Get Parameter Command Format:

Set Parameter Command Format:

Response Format:

Bits [31:0] are sticky and will not be reset by a Link Reset or a Codec Reset:

Bits [31:28] Bits [27:20] Bits [19:8] Bits [7:0]

CAd = X Node ID = 0Ah Verb ID = F1Ch Payload = 00h

Bits [31:28] Bits [27:20] Bits [19:8] Bits [7:0]

CAd = X Node ID = 0Ah Verb ID = 71Ch Payload = xxh (Config bits [7:0])

CAd = X Node ID = 0Ah Verb ID = 71Dh Payload = xxh (Config bits [15:8])

CAd = X Node ID = 0Ah Verb ID = 71Eh Payload = xxh (Config bits [23:16])

CAd = X Node ID = 0Ah Verb ID = 71Fh Payload = xxh (Config bits [31:24])

Bits Type Default Description

31:30 Read/Write 00b

Port Connectivity (PCON): The port complex is

connected to a jack.

29:24 Read/Write 000001b

Location (LOC): This field indicates the physical

location of the jack or device to which the pin

complex is connected. Set to External | Rear.

23:20 Read/Write 0h

Default Device (DD): Indicates the intended use

of the connection is for Line Out.

19:16 Read/Write 1h

Connection Type (CTYP): Indicates the type of

physical connection is 1/8” jack.

15:12 Read/Write 4h

Color (COL): This field indicates the color of the

physical jack for use by software. The color

selected is Green.

11:8 Read/Write 0h

Miscellaneous (MISC): No PDC override.

7:4 Read/Write Fh

Default Association (DA): This field is used by

software to group Pin Complex (and therefore

jacks) together into functional blocks to support

multichannel operation. All jacks with the same

association number may be assumed to be

grouped together. A value of all ‘0’s is reserved.

A value of all ‘1’s in this field indicates that the

Association has the lowest priority.

3:0 Read/Write 0h

Sequence (SEQ): This field indicates the order

of the jacks in the association group.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 147 148

Comments to this Manuals

No comments

Cirrus-logic CS4207 User Manual Page 91

Comments to this Manuals

Related products and manuals for Hardware Cirrus-logic CS4207