Cirrus-logic CS8406 User Manual download pdf (Page 29)

DS580F6 29

CS8406

11.PIN DESCRIPTION - HARDWARE MODE

VD 6 Digital Power (Input) - Digital core power supply. Typically +3.3 V or +5.0 V.

VL 23 Logic Power (Input) - Input/Output power supply. Typically +3.3 V or +5.0 V.

GND 22 Ground (Input) - Ground for I/O and core logic.

RST 9

Reset (Input) - When RST

is low, the CS8406 enters a low power mode and all internal states are reset.

On initial power up, RST

must be held low until the power supply is stable, and all input clocks are stable

in frequency and phase. This is particularly true in Hardware Mode with multiple CS8406 devices, where

synchronization between devices is important.

H/S

Hardware/Software Control Mode Select (Input) - Determines the method of controlling the operation

of the CS8406, and the method of accessing CS and U data. Hardware Mode provides an alternate

mode of operation, and access to CS and U data is provided by dedicated pins. To select Hardware

Mode, this pin should be permanently tied to VL.

TXN

TXP

Differential Line Drivers (Output) - These pins transmit biphase encoded data. The drivers are pulled

low while the CS8406 is in the reset state.

OMCK 21 Master Clock (Input) - The frequency can be set through the HWCK[1:0] pins.

ISCLK 13 Serial Audio Bit Clock (Input/Output) - Serial bit clock for audio data on the SDIN pin.

ILRCK 12

Serial Audio Input Left/Right Clock (Input/Output) - Word rate clock for the audio data on the SDIN

pin.

SDIN 14 Serial Audio Data Port (Input) - Audio data serial input pin.

COPY / C ORIG

TEST HWCK1

EMPH

TXP

SFMT0 TXN

SFMT1 H/S

VD VL

TEST GND

TEST OMCK

RST HWCK0

APMS AUDIO

TCBLD U

ILRCK V

ISCLK CEN

SDIN TCBL

821

12 17

14 15

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 38 39

Comments to this Manuals

No comments

Cirrus-logic CS8406 User Manual Page 29

Comments to this Manuals

Related products and manuals for Hardware Cirrus-logic CS8406